Gork@sopuli.xyz to Dull Men's Club@lemmy.world · 4 days agoMy faucet nozzle was dangling so I came up with a proper doohickey with magnets to fix itfiles.catbox.moevideomessage-square19linkfedilinkarrow-up1156arrow-down11file-text
arrow-up1155arrow-down1videoMy faucet nozzle was dangling so I came up with a proper doohickey with magnets to fix itfiles.catbox.moeGork@sopuli.xyz to Dull Men's Club@lemmy.world · 4 days agomessage-square19linkfedilinkfile-text
minus-squareBluefruit@lemmy.worldlinkfedilinkarrow-up5·4 days agoCurious what the process was for this, were the magnets cut in half from the factory or were the holes big enough to slip everything through?
minus-squareGork@sopuli.xyzOPlinkfedilinkarrow-up2·4 days agoTwo opposing 10x3 magnets placed in holes on each side. Both pairs are separated by 0.8 mm of plastic so they don’t directly touch.
Curious what the process was for this, were the magnets cut in half from the factory or were the holes big enough to slip everything through?
Two opposing 10x3 magnets placed in holes on each side. Both pairs are separated by 0.8 mm of plastic so they don’t directly touch.